High performance

of solid profiles without visible screws.

In Inox and Aluminium

All standard parts and screws are in inox, construction in aluminium.


With or without additional storage space.


Additional side walls.

Shield your vehicle with Carport SL 240

Technical details

Profile specification

Roof specification


Carport SL 240
For 2 cars

Roof coverInsulated panel 3 cm
Secondary beam profile150/50
Max width6000 mm
Max lenght on 2 poles*6000 mm
(max overhang 1,2 m)
Max lenght on 3 poles*8000 mm
(max overhang 1,2 m)
Instalation - 4 or 6 polesSelfstanding
Instalation - up to 3 polesWallmounted
Foot type (optional: painting or inox)External 150 - galvanized
N° of water exits2
Max snow load
(secondary beam profile on 1200 mm)
100 kg/ m2
Max snow load
(secondary beam profile on 600 mm)
160 kg / m2

* Max distance between poles 4,7 m.


Carport roof has to be assembled with minimum 2° inclination for the water evacuation to function properly, towards the oposite side from the car entrance.


Water exit are on P1 and P2. Water exit is only toward poles P1 and P2. Poles are of different hight.


Frame parts are made exclusively of aluminium and stainless steel.


Do you need additional space?

0 +
presence in countries
0 +
quality certificates
0 +
years of life expectancy
0 +
elements of additional equipment

Shield your vehicle
with one click

EUROCODE standards

Carport structure is designed using the Eurocode standards. It is assembled according to EN 1090 standard. The prescribed maximal loads are calculated for two different scenarios, for maximal load of 90kg/m2 and 160 kg/m2. These loads are already multiplied by safety factors and include wind and snow loads.