Bioklimatska pergola Agava​

The Bioclimatic pergola Agava is developed and produced in Slovenia, at Soltec, in Dobova. For over 20 years we have been developing and manufacturing our own modern blinds, dynamic facades and balconies. Since 2013, we have been developing and manufacturing bioclimatic pergolas. In 2020, we added to the Agava product line – Carport Agava!

Bioclimatic is a pergola whose roof consists of rotating aluminium blades that allow air to circulate in addition to regulating light. This creates a microclimate that is comfortable to stay under the pergola.

Waterproof roof blades that are made of extruded aluminium, rotate and allow opening, regulating shading and sun exposure. Blades are patented and protected by the patent SI 24401 A.

You will receive instructions for use and maintenance when purchasing the pergola. Basic cleaning of the product is recommended and should be performed as directed. Above all, it is very important that the gutter is passable, that the blades are cleaned and that there are no obstructions on the roof that could damage the blades when closed. Maintenance or annual service is performed only by an authorized person. After installation you will receive a warranty and user manual.

It is recommended that the blades are slightly closed in winter so that they do not adhere to each other when freezing. Different pergola models offer different load functionality according to pergola dimensions. This tells us whether the blades should be opened or closed. For Pergolas with lower functionality load we recommend opening the blades, thus preventing the accumulation of snow on the roof and consequently any possible injuries to the pergola. Pergola should be inspected regularly. If there are any visible changes and damage in the event of a frost, it is necessary to contact the company or an authorized distributor immediately.

When the blades are closed, the pergola does not allow water to pass through. In combination with EPDM rubber for external use and overlay profile of the blades we guarantee watertightness of the blades.

According to EN 13561, all Agava pergolas are certified for wind resistance in accordance with wind class 3 to 49 km / h. Our pergolas are designed to withstand even higher wind loads up to 120 km / h. However, it should be kept in mind that in this case the blades are always in the open position.
In the case of wind extremes, it is advisable to purchase a wind sensor that opens the blades in case of strong winds.

The pergola can be installed as a self-standing, but it can also be installed in a wall and then supported by two columns. Pergola can also be installed in an existing concrete constructions or a wooden or iron substructure. In this case poles are not necessary and we execute a custom made solution for the water exits.

Yes, the big advantage of the blades roof is that it is possible to regulate daylight by turning the blades. The sun rays always pass through the roof at an angle, allowing us to adjust the ideal light. That is why we no longer have problems with a distracting direct light. Side views can also be veiled by ZIP rolo shutters that let in less light or sliding panels that allow more daylight.

The Agava SL product line is made of aluminium construction and the Agava XL product line is made of steel construction. The blades are made of aluminium.

LED lights are integrated into the rotating blades. LED strips can be 0,5m to 1,5m long and with the options of adjusting the light intensity, you can optimize the brightness of your terrace, read a book, enjoy a dinner or an evening cup of tea,…

It depends on the spatial ordinance or directive of each municipality, so we recommend that you check it at the Administrative Unit. In principle, however, a building permit for such structures is not required.

We are very flexible with our system and we always find a suitable solution. Nevertheless, there is a possibility that because of the slopes on the building, we cannot offer our construction. In order to provide the perfect solution according to your terrace/balcony, we optimize the pergola installation.

In case that water is stuck in the blades for some obstacle or any other reason, this should not be a problem for the pergola and its functioning. However, if there is a suspicion that water is retained in the blades, the move of the bladess is done for approximately 15%. After this is carried out, all water must drain easily through the water channel in the blades into the drainage channel within 30 seconds.

Every blades has its own draing canal, water from the blades drains through the canals, integrated in the construction frame and through the integrated water canals in the construction poles.

We have 4 standard colors and more than 1400 additional RAL colour options.

Pergola can be heated with additional IR panels. One heater covers up to 15 m2. However, the construction itself is not tight, which means that it cannot be completely closed. The air is always circulating.

The pergola cannot be equated with the winter garden. Pergola has the function of a ventilated terrace, crates bioclimate and prevents overheating. With additional equipment it van be used whole year round.

Delivery & installation

The ordering process always starts with sending the request, which contains all the necessary information to make a formal offer. This is always followed by a telephone conversation, or you can also make an appointment in person at the company or at your home. After the last adjustments, the offer is confirmed with an advance payment. When ordering, 50% of the advance will be paid, the remaining 50% will be paid 5 days before installation.
If you come to us, you will also be able to see the sample pergola.

From the payment of the first advance, the production period is 4 to 6 weeks. During the construction of the pergola, the installation date is also determined.

Installation lasts from six to eight hours, if standard. For more complex assemblies, it takes up to two working days.

You must have a concrete slab ready, or a suitable 40/40/80 cm concrete foundation for fixing our structure to the floor and an inlet for electricity.

Installation is shown separately on the offer and is not included in the price of the product itself.

Upon advance payment, that is, even before production, on-site measurements are made by qualified personnel.

First, a diagnosis is made to determine where the problem is and why the problem occurred. We then present it to you and let you know if it there are, for one reason or another, costs involved.

The exhibit can be seen at the Soltec company in Dobova upon prior announcement. Next to our production hall, we have showroom with 2 models, SL 160/28 and 240/36, with additional equipment. Welcome!

The Bioclimatic pergola Agava is manufactured according to EN standards.

The Bioclimatic pergola Agava has a 5-year construction warranty and 2 years warranty on electronic equipment and components.

When purchasing the Bioclimatic pergola Agava, you can choose from a wide variety of accessories.
We can incorporate LED lights into the rotating blades. You can adjust the brightness according to your preference or create the atmosphere of your choice.
The pergola can also be equipped with IR heaters, which allow you to enjoy under the pergola in cooler evenings.
Pergolas can also be fitted with rain and wind sensors. In the event of rain, the blades will automatically close and open in the event of wind.
The speakers can also be installed in the pergola, which you control via Bluetooth.

Yes, visual and additional solar protection is provided by the sliding panels. The accessory panels can be placed in a permanent position or moved according to the desired shade and ventilation. The most commonly used and recommended materials are wood and aluminium.

Yes, if you want to close the Bioclimatic pergola Agava elegantly while maintaining the view, glass panels are the perfect solution.

Vertical, electrically powered ZIP shutters are the perfect solution for protection against rain, wind and insects. They provide visual protection and additional shade.

Yes, Soltec company developes and manufactures sliding panels and ZIP rolo shades for a variety of use.